Features:
Dimensions:120 x 63 x 32 mm.
Probe line length: About 232 cm.
Rated voltage: 50HZ, 220 AC
Controllable temperature range: -9 to +38 degree.
Maximum load power:1500 Watts.
Operating instructions
Switch on the thermostat with power. The screen shows current temperature.
Button "SETTING": used for switch between "WORKING" mode and "SETTING" mode.
Press once, the thermostat go into setting mode, press another, the thermostat goes back to working mode.
Button "TEMPERATURE +": used for elevating temperature. When the screen shows "SETTING", each pressing on the button elevates 1 degree . Long pressing on increases the temperature till +38 degree. After 5 seconds no operating, the thermostat returns to working mode.
Button "TEMPERATURE -": used for lowering temperature. When the screen shows "SETTING", each pressing on the button reduce 1degree .
Long pressing on lowers the temperature till -9 degree. After 5 seconds no operating, the thermostat returns to working mode.
Heating mode and cooling mode change
In the "WORKING" mode, press Button "TEMPERATURE +", after 4 seconds, the "WORK" mode will change, heating mode to cooling mode, or cooling mode to heating mode.
Heating mode: When current temperature = set temperature - 1degree ,switch on the power;When current temperature = set temperature + 1degree ,cut off the power;
Cooling mode: When current temperature = set temperature + 1degree ,switch on the power;When current temperature = set temperature - 1degree ,cut off the power;
Protection function
When short circuit occurs, temperature screen shows [dd], the power automatically cut off.

Included: 1X Reptile Aquarium Tank Snake Lizard Incubator Heat Pad Mat Lamp Thermostat

• Dimensions:120 x 63 x 32 mm.
• Probe line length: About 232 cm.
• Controllable temperature range: -9 to +38 degree.
• Maximum load power:1500 Watts.
• Operating instructions