Disc: 1.5cm.
Output Voltage: 24V DC.
With a US AC/DC adapter.
Input: 110-250V, 50/60Hz.
Output: DC 24V, 700mA.
Aerosolized amount:=400mL/H
Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter

Package included :
1 x Mist maker
1 x AC-DC adapter (US plug)

Points for attention:
1. Do not turn over the Mist Maker When the switch is turned on, keep upright, or it may damage the atomizer.
2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.
3. Don't touch the atomizing slice while the Mist Maker is working.
4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable, and its service life is=3000 hours. If marked reduction of Mist present, please clean atomizing slice with a cotton swab (don't need to use any detergent).Keep it clean.

Note:The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles

• Add great effects to your pond or swimming pool. Perfects for use it in your pond, rockery, fishtank, vase, birdbath,outdoor fountains, water feature, and office use etc, then it will create a magical atmosphere.
• No heat or chemicals used. Atomization Amout:=400mL/H.
• Easy to operate, put in the water and the voltage is 24V, then the mist appears.
• Mist Maker Size: 4.6 cm diameter, 4.2cm tall. Material: aluminum
• Package included : 1 x Mist maker 1 x AC-DC adapter (US plug)