Feature: The Jebao 36W Ultraviolet Sterilizer is used to destroy single celled organisms such as water borne bacteria and viruses. The sterilizer is also used to control algae and and to kill fungi and protozoa. Aqua Ultraviolet Sterilizers are recommended for both fresh and salt water systems as well as ponds. The ultraviolet lamp emits a germicidal ray which alters or disrupts the DNA or RNA of targeted organisms such as algae, bacteria and protozoa. The Aqua ultraviolet sterilizer works better on filtered water. Any debris in the water can inhibit UV transmission. Instructions: The Jebao 36W Ultraviolet Sterilizer can be installed vertically or horizontally. The best place to install your UV sterilizer is after the filter. If it is necessary to install the sterilizer before the filter, adequate pre-filtration should be used to prevent the quartz sleeve from breaking from debris. If your system is installed after the filter and is properly sized, the water should be clear in 3-5 days. If it is installed before the filter, the water should be cleared in 7-10 days. The Jebao 36W Ultraviolet quartz sleeve may need to be cleaned to remove film from the surface that will hinder the effectiveness of the UV. It can be cleaned with swimming pool muratic acid, lime away or a similar product. Do not use any type of abrasive substance on the quartz sleeve as it may scratch the quartz.

• Permanent Elimination of Algae Bloomy to Get Rid of Green Water
• 2G11 base 36w UV lamp pre-installed. All units have 3/4", 1", 1-1/4" and 1-1/2" fittings
• Complete with 22 ft cord and UL listed sealed transformer. Max flat rate: 4400 GpH
• For external use only (non-submersible). Install in-line after pond water has passed through a filter for best sterilization effect.
• For peak performance, the 36w Ultraviolet Bulb should be replaced once every 6-12 months of operation