Main features:
Plug and play design, easy to use;
Support reading with Centigrade or Fahrenheit unit;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.

Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC-308S Temperature Controller;
1x 1.97" Female to Male NTC Sensor
1x Manual

• You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
• F/C degree display; Easy to set, PV and SV dual display windows
• Maximum output load: 1200W(120V); Alarm when over-temperature and sensor error
• Dual display window, be able to display measured temperature and set temperature at the same time
• The temperature controller sensor is stainless and waterproof IP68.