Aquatica Plus is part of the Amazon Affiliate Network. We may receive payment for items purchased through the Amazon website.
The BTC201 temperature controller can turn on/off an electric appliances at desired temp.
For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play.
Maximum load: 1100W @110V or 2200W @220V(Not compatible with the 2 hot line 220V plug).
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC201 Temperature controller
1x sensor cable
1m/3.3ft power cord
For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play.
Maximum load: 1100W @110V or 2200W @220V(Not compatible with the 2 hot line 220V plug).
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC201 Temperature controller
1x sensor cable
1m/3.3ft power cord
- Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature range
- Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
- Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
- MAX LOAD: 1100W at 110V. Celsius or Fahrenheit Read-out
- WIDE RANGE OF USES: seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc
Temperature Controller bayite BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A
- Brand: bayite
- Product Code: BTC201
- Note: Aquatica Plus is an Amazon Affiliate and may receive payment for items purchased on Amazon.